Product Updates
Click here to see our low-cost belts for die cutting.

Designed to Cut Non-Metallic Materials for Gasket, Foam, Packaging, Rubber, Automotive, Textile and Other Industries

• Fast die change and set up times
• Driven pinch rollers
• Infeed and outfeed conveyers
• Moveable control console for easy operation
• Language-selectable keypad with inch or millimeter readout
• PLC controlled servo motor indexing
• Automatic or manual operation
• Adjustable cutting stroke
• Adjustable cutting pressure
• Adjustable material indexing length
• Automatic sheet sensing and positioning
• Handles sheet or roll goods
• Thru-cutting or kiss cutting
• Stop blocks determine accurate cutting depth
• Two material guides on infeed to center material
• Cut into available cutting belts or onto steel plate
• Cutting belt carries the parts or product out of the press, eliminating the need to notch
• Longer die life
• Easy to run and maintain
• Automatic belt tracking
• Manufactured in the U.S.A.

Specifications

• Platen Sizes and Tonnage:
  
  • 32" x 28" (81cm x 71cm) 45-ton
  • 32" x 32" (81cm x 81cm) 45-ton
  • 39" x 28" (99cm x 71cm) 45-ton
• Overall Dimensions (32" x 32" Platen Size):
  
  • 19'-2" L x 4'-6" W x 9'-5" H (584cm x 137cm x 287cm) plus console
• Material Cutting Capacity:
  
  • 2" (5.08cm) thick standard
  • 4" (10.16cm) thick with standard guards
• Maximum Ram Travel (Daylight):
  
  • 7" (17cm)
• Feed Accuracy:
  
  • ± 0.015" (0.038cm) standard
• Pinch Roller & Cutting Belt Drive:
  
  • PLC controlled servomotor
• Cutting Speed:
  
  • Up to 38 hits-per-minute
• Conveyor Length:
  
  • Infeed - 7'-7" (231cm) standard with two material guides on infeed table
  • Outfeed - 7'-7" (231cm) standard / 10'-7" (322cm) optional
  • Special lengths also available
• Hydraulic Pump Motor:
  
  • 15 HP, 3-phase AC
• Voltage:
  
  • 208, 230, 460 VAC, 3-phase
  • Other voltages available

Options

• Air clean-out system for feed-thru punches (includes vacuum unit, controls and die mounting plate)
• Wind-up unit for winding up scrap or finished goods
• Let-off unit with adjustable brake for roll goods
• Color sensing photo eye for accurate sensing and positioning of thin material

Control panel on moveable console with digital readout
(Click for larger image)